Boards, screens and takeovers
A board is what gets shown. A screen is a television showing it. A takeover shows a different board on some screens for a while.
Boards and screens
Think of a board as a channel and a screen as a television tuned to it.
- A board is a stream of approved photos and a calendar of approved events. It lives in the console, under Boards. Approving something is choosing which boards it goes on — one, or several.
- A screen is one television, with a small computer behind it. It lives under Displays. Each screen shows exactly one board at a time.
- Several screens can show the same board. A board with no screen is fine too — content waits on it until a screen is pointed there.
An example
| Board | Shows | On the screens |
|---|---|---|
| Main Lobby | Photos from everything, and the whole calendar | Lobby, Café |
| Youth | Youth photos, and youth events | Youth room |
| Gym | Sports photos, photos only — no calendar | Gym |
A photo from the youth retreat might be approved to Youth and Main Lobby, so it plays in three rooms. A sports-night photo might go to Gym only. Every Wednesday a takeover puts the Youth board on the Lobby screen for the evening.
When to make a second board
One board is enough until two places need different things. Each extra board is one more decision on every approval. Make another when a room has its own audience (a youth room, a nursery hallway), its own purpose (photos only, with no calendar), or its own moderators’ judgement about what fits.
Copy to…, on a board’s row, adds everything on it to another board — useful for starting a new board from an old one. It adds; nothing already on the other board is removed.
A board’s settings
Choose Edit on a board (admins):
- Name and description, for the console. Its short name is fixed once screens use it.
- Layout: Photos and calendar, or Photos only, where the photos fill the whole screen and any events approved to the board wait for the calendar to come back.
- QR code on this board’s screens puts an upload page’s code on the screens, so nobody has to print a poster.
- Takes over screens — see Takeovers.
From a board’s … menu, Archive retires a board without losing what is on it, and Restore brings it back; a screen still pointed at an archived board says so on the television. Delete removes it for good.
Watching a board in your browser
Choose Play beside a board (moderators and admins). It opens in a new tab and plays just as a screen would, so you can check a new board, or what people will see on Sunday, without walking to a television. New board offers the same thing at the end, as Play it in this browser.
- The arrow keys step through the photos, and Full screen fills the monitor — handy for a projector.
- It is not a screen. It never appears in Displays and never counts as one.
- It stops when you sign out of the console, after 12 hours, or when its tab is reloaded, and then says This preview has ended. Choose Play again to carry on.
- You can have five playing at once. A tab you close stops counting within a few minutes.
For a television that stays on, set it up as a screen instead: Setting up a screen.
Pointing a screen at another board
On Displays, change the screen’s board. It switches within a minute, and nobody has to go near the television. For a change that should undo itself, use a takeover instead.
Setting a screen up in the first place is in Setting up a screen.
Takeovers
Every screen has its own board — the one you picked when you set it up. A takeover shows a different board on some screens for a while: the youth board on the lobby screen every Wednesday evening, or one board on every screen in the building for a single Sunday. When the time is up, each screen goes back to its own board by itself.
- Make sure your organization’s time zone is set, in Settings. Until it is, no takeover can be added and none runs.
- Open Boards and choose Edit on the board you want shown.
- Under Takes over screens, choose Add a time.
- Pick Every week — days, a start and an end, and optionally only between two dates — Once, with a start and an end, or During events, with an event category and how long before and after each event.
- Tick the screens. Every screen also covers screens you set up later, so a building-wide time does not need editing when a new television arrives.
Each time is saved on its own, as soon as you add it — not with the board’s Save. A time can run past midnight: Thursday 7pm to 1am carries on into Friday morning.
While one is running, Displays says so on that screen’s row — “Now showing Gym until 9:00 PM · usually Main Lobby” — so a television on another board is not mistaken for a fault. Screens switch within a few seconds of the start and the end.
During events takes its times from the calendar you already keep: “the Youth board on the Gym screen during any Youth event, from half an hour before to half an hour after.” Every approved event in that category counts, whichever boards it is on, as long as it has a start time — all-day events do not, as an all-day retreat would hold the screen for days. An event added or approved later is picked up by itself.
To see what one screen will show over the next seven days, choose See the week on its row in Displays. It lists each day’s takeovers and the gaps between them, and says where one takeover gave way to another.
Two weekly times cannot share a screen at the same hour, and nor can two one-time ones; the console names the time it clashes with. A one-time takeover does win over every other kind, which is how you say “this Sunday is different”, and a takeover during events wins over a weekly one. Two takeovers during events can meet on one screen — nobody knows on Monday which events Friday will hold — and the one that started first wins, and the screen’s week shows it.
A daylight-saving change moves nothing: 6pm stays 6pm.
If the board a time shows is archived or deleted, or the event category a takeover during events follows is deleted, that time stops running and the screens stay on their own boards. Boards and Displays both point it out.
A screen that has lost its internet connection keeps showing what it had, and does not switch until it is back.
Once a one-time takeover is over, or a weekly one is past its last date, it is marked Ended. Give it new dates to use it again; otherwise it is cleared away by itself after about a month.